31
On Screen Display (OSD) - OSD Settings Sub-Menu
OSD SETTINGS (Sub-Menu) - LANGUAGE
The NX-EDG27 supports multiple languages for its On Screen Display (OSD) Menu.
a) To bring up the OSD Main Menu, press "MENU". Next use the arrow buttons "VOL -" or press "VOL+"
to navigate to the OSD SETTINGS sub-menu and press "MENU" to confirm selection.
a) Use the arrow buttons "DOWN" or "UP" to navigate to LANGUAGE. Make sure selection is highlighted
(see picture) and press "MENU" to confirm selection.
b) Use the arrow buttons "VOL -" or press "VOL+" to navigate to the preferred "LANGUAGE." Make sure
selection is highlighted (see picture) and press "MENU" to confirm selection. ENGLISH is the default
LANGUAGE. Available LANGUAGES include French, Italian, Spanish, Dutch, and Portuguese.
c) Press "AUTO" once to confirm preferred settings and exit to the SETUP sub-menu to begin the next
adjustment or to completely exit out of the On Screen Display by pressing "AUTO" again.
To Next Page
Loading...
Need help?
General
