32
OSD SETTINGS (Sub-Menu) - MENU TIME
The MENU TIME feature allows you to set how long or how short the OSD Menu remains on screen. If you
want the OSD Menu to immediately to go away you can always press "AUTO."
a) To bring up the OSD Main Menu, press "MENU". Next use the arrow buttons "VOL -" or press "VOL+"
to navigate to the OSD SETTINGS sub-menu and press "MENU" to confirm selection.
b) Use the arrow buttons "DOWN" or "UP" to navigate to MENU TIME. Make sure selection is highlighted
(see picture) and press "MENU" to confirm selection.
c) The default OSD MENU TIME is 25 seconds. Use the arrow buttons "VOL -" or press "VOL+" to adjust
between 5 seconds to 60 seconds for the MENU TIME or Duration of the OSD MENU. Press "MENU" once
to confirm preferred settings and press "AUTO" to exit to the OSD SETTINGS sub-menu to begin the next
adjustment or to completely exit out of the On Screen Display press "AUTO" again.
NOTE: Pressing "AUTO" can always be used to exit out of the OSD MENU without having to wait for the
whole duration of the MENU TIME.
To Next Page
Loading...
Need help?
General
