23
COLOR (Sub-Menu) – TEMPERATURE
The NX-EDG27 has a premium feature to allow you to custom calibrate the color temperature and color
settings for RED, GREEN, and BLUE without the assistance or need of your computer's operating system or
graphics card color temperature calibration features. This feature allows you to create more accurate colors for
content creation, print work, photography and graphic design. We recommend only to use this feature with
colorimeter hardware. To enable this feature and make it active for the video/picture of the monitor, you have
to enable and activate USER in the TEMPERATURE category of the COLOR Sub-Menu.
a) In the COLOR sub-menu, use the arrow buttons "DOWN" or "UP" to navigate to TEMPERATURE and
press "MENU" to enable TEMPERATURE selection.
b) Use "VOL -" or "VOL+" to cycle through the settings and to highlight USER.
c) Press "MENU" once to confirm the USER selection and exit to the COLOR sub-menu. The RED, GREEN,
and BLUE are now selectable for custom configuration.
NOTE: TEMPERATURE default settings is 6500K. Other TEMPERATURE settings of 5400K, SRGB,
USER,and 9300K. The TEMPERATURE setting must be set to USER. USER needs to always be highlighted
and selected in TEMPERATURE settings if you need to custom calibrate colors for professional work. If
USER is not selected - the RED, GREEN, and BLUE will be grayed out and not selectable for configuration.
Also if USER is not selected or active - the custom settings will not be represented on the monitor and
picture/video.
NOTE: Only Custom Calibrate the Monitor's GAMMA and COLOR TEMPERATURE if you have a
Colorimeter.
To Next Page
Loading...
Need help?
General
