28
DP OPTION – DISPLAYPORT OPTION
The NX-EDG27 two DP OPTION (DisplayPort Options) for your DisplayPort cable and DisplayPort source
version type. The default setting is DP 1.2, which is required for the NX-EDG27 to have a resolution of
2560x1440, AMD FreeSync and 144Hz refresh rate. The alternative setting of DP 1.1 can only support
2560x1440 resolution with 60Hz refresh rate.
a) In the ADVANCE sub-menu, use the buttons "DOWN" or "UP" to highlight DP OPTION and press
"MENU" to confirm selection.
b) Press "VOL -" or "VOL+" change the DP OPTION. The default setting is DP 1.2 and is the
recommended settings.
c) Once you selected your DP OPTION settings, press "MENU" once to confirm and press "AUTO" to exit
to the ADVANCE sub-menu.
To Next Page
Loading...
