7
Monitor and Stand Adjustment
Monitor Tilting Forward/Back (NX-EDG27 and NX-EDG27S):
Make sure the NX-EDG27 is on a stable level surface. Use both hands, hold the top and bottom of the frame to
tilt the monitor forward or backward by up to 15°.
Monitor Swivel Left/Right (NX-EDG27):
Make sure the NX-EDG27 is on a stable level surface. Holding the base shaft with your hand, carefully twist
the monitor shaft left or right to desired orientation.
Monitor Height Adjustment (NX-EDG27):
Use both hands, press down the locking button, the slide the monitor up and down the stand shaft for your
desired height by up to 4 inches. Release button to lock in the desired height.
To Next Page
Loading...