33
OSD SETTINGS (Sub-Menu) - OSD H POSITION
The OSD H POSITION and features allows you to set the OSD MENU (On Screen Display Menu) to either
towards the left or right of your monitor's screen.
a) Make sure the OSD H POSITION selection is highlighted in red (see picture) and press "MENU" to confirm
selection.
b) Use the arrow buttons "VOL -" or press "VOL+" to adjust between 0 to 100 for the OSD H POSITION
placement of the OSD MENU towards the LEFT or RIGHT of the display.
c) Press "MENU" once to confirm selection and exit to the OSD SETTINGS sub-menu to begin the next
adjustment or to completely exit out of the On Screen Display press "AUTO"gain.
To Next Page
Loading...
Need help?
General
