13
INSTRUCTIONS
INSTALLATION
As explained before, water temperature is an important factor in ensuring that your
dish machine functions properly. The data plate located on each unit details what the
minimum temperatures must be for either the incoming water supply, the wash tank
and the rinse tank, depending on what model of dish machine you have installed.
These temperatures may also be followed by temperatures that Noble recommends
to ensure the highest performance from you dish machine. However, if the minimum
requirements are not met, the chances are your dishes will not be clean or sanitized.
Remember, a dish can look clean, but it may not be sanitized. Instruct your dish
machine operators to observe the required temperatures and to report when they
fall below the minimum allowed. A loss of temperature can indicate a much larger
problem such as a failed heater or it could also indicate that the hot water heater for
your operation is not up to capacity and a larger one may need to be installed.
There are several factors to consider when installing your dish machine to ensure that
you get the best possible results from itand that it operates at peak efciency for many
years. Discuss your concerns with your local chemical distributor and water treatment
specialist before there is a problem.
DETERGENT
CONTROL
(CONTINUED):
To Next Page
Loading...
