51
HTS-11 SCALE PREVENTION
& CORROSION CONTROL DEVICE
PARTS
ITEM QTY DESCRIPTION PART NUMBER
1 1 Kleeneware HTS-11 System 04730-003-28-03
2 1 Replacement Cartridge (Inspect at least every 6 months) 04730-003-28-04
Replacement Test Strip (not shown) 06401-003-28-06
1
2
Must be installed vertically. The provided bracket is to be secured to the wall.
Observe proper inlet/outlet water directions. Flow directions are molded into the
top of the head. Line pressure should be released prior to changing cartridges. De-
liming of equipment prior to installation is recommended but no required.
INSTALLATION
INSTRUCTIONS:
To Next Page
Loading...
