Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 541
If the user specifies max, the software allocates one chunk when the first SAP is
associated with a SAP ingress QoS policy using this match criteria. It continues to
allocate resources to SAPs associated with a SAP ingress QoS policy using this
criteria, as long as the total amount of resources allocated does not exceed the
resources allocated to SAP ingress QoS policies (configured with the config system
resource-profile ingress-internal-tcam qos-sap-ingress- resource command)
and chunks are available for use.
Values Table 54 lists the parameter values.
ipv6-64-only-match-enable
Syntax ipv6-64-only-match-enable num-resources
no ipv6-64-only-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Table 54 Number of Resources Available for IPv4-Match-Enable
Platforms Min value
(per node)
Max value (per
node)
Default
Values
7210 SAS-M (per node) 0 10 max
7210 SAS-T access-uplink mode (per
node)
07 max
7210 SAS-T network mode (per node) 0 6 max
7210 SAS-R6 (per IMMv1) 0 7 max
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
012 max
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
010 max
7210 SAS-Mxp (per node) 0 10 max
7210 SAS-Sx 1/10GE (per node)
(standalone)
07 max
7210 SAS-Sx 1/10GE (standalone-VC) 0 6 max
7210 SAS-S 1/10GE (per node)
(standalone)
07 max
7210 SAS-S 1/10GE (standalone-VC) 0 6 max
7210 SAS-Sx 10/100GE (per node) 0 3 max

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English