Nokia 7210 SAS-M User Manual

System Management
554
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
The no form of this command reverts to the default value.
Default qos-network-ingress-resource 0
Parameters num-resources — Specifies the number of resources allocated to network ingress QoS
policy queues.
Values 0, 2, def
qos-sap-ingress-resource
Syntax qos-sap-ingress-resource num-resources
no qos-sap-ingress-resource
Context configure>system>resource-profile>ing-internal-tcam
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command allocates maximum resources for use by SAP ingress QoS policies using any
of the supported match criteria. This command limits the total amount of chunks allocated for
use by SAP ingress QoS policies to the value specified by num-resources. In other words,
the cumulative sum of chunks allocated to different match criteria supported by SAP ingress
QoS policies cannot exceed the value configured with num-resources.
The no form of this command specifies that the software does not allocate any resources for
use by SAP ingress QoS policies.
If no resources are allocated for use, the software fails all attempts to associate a service
entity (for example, SAP and IP interface) with a SAP ingress QoS policy using any of the
match criteria.)
Parameters num-resources — Specifies the amount of resources that can be allocated for use by
SAP ingress QoS policies.
If the user specifies def, the software allocates the default amount of resources
based on the 7210 SAS platform. On 7210 SAS-R6 and 7210 SAS-R12, the amount
of default resources allocated also varies based on the IMM plugged into the slot.
Values Table 61 lists the parameter values and provides the values used for
def keyword on different 7210 SAS platforms and on different IMM
types.
Table 61 Number of Resources Available for QoS-SAP-Ingress-Resource
Platforms Min value
(per node)
Max value (per
node)
Default
Values
7210 SAS-M (per node) 0 10 5

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English