Nokia 7705 - Page 165

System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 165
3.10.2.2.1 Security Show Commands
access-group
Syntax access-group [group-name]
Context show>system>security
Description This command displays SNMP access group information.
Parameters group-name — displays information for the specified access group
Output The following output is an example of system security access group information, and
Table 10 describes the fields.
Output Example
A:ALU-4# show system security access-group
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
snmp-ro snmpv2c none no-security no-security
snmp-rw snmpv1 none no-security no-security no-security
snmp-rw snmpv2c none no-security no-security no-security
snmp-rwa snmpv1 none iso iso iso
snmp-rwa snmpv2c none iso iso iso
snmp-trap snmpv1 none iso
snmp-trap snmpv2c none iso
===============================================================================
A:ALU-7#
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
Table 10 Show System Security Access Group Output Fields
Label Description
Group name The access group name
Security model The security model required to access the views configured in this
node
Security level Specifies the required authentication and privacy levels to access
the views configured in this node