Event and Accounting Logs
310
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
Parameters eq | neq — the operator specifying the type of match. Valid operators are listed in
Table 36.
application-id — the application name string
Values aps, atm, bgp, chassis, debug, dhcp, dhcps, efm_oam, eth_cfm,
filter, firewall, igmp, igmp_snooping, ip, ipsec, isis, lag, ldp, lldp,
logger, mcpath, mc_redundancy, mirror, mld, mld_snooping, mpls,
mwmgr, ntp, oam, ospf, pim, pim_snooping, port, ppp, ptp, radius,
rip, rip_ng, route_policy, rsvp, security, snmp, stp, svcmgr, system,
tss, user, vrrp, vrtr
number
Syntax number {eq | neq | lt | lte | gt | gte} event-id
no number
Context config>log>filter>entry>match
Description This command adds a TiMOS application event number as a match criterion.
TiMOS event numbers uniquely identify a specific logging event within an application.
Only one number command can be entered per event filter entry. If multiple number
commands are entered, the last command overwrites the previous command.
The no form of the command removes the event number as a match criterion.
Default no event-number
Parameters eq | neq | lt | lte | gt | gte — this operator specifies the type of match. Valid operators
are listed in Table 37.
Table 36 Valid Match Operators for Applications
Operator Notes
eq Equal to
neq Not equal to
Table 37 Valid Match Operators for Event Numbers
Operator Notes
eq Equal to
neq Not equal to
To Next Page
Loading...
