After Sales
Technical Documentation
RAE/RAK–1N
Service Software
Page 7– 67
Amendment 1 04/97
3.4 – Erase Flash
This menu provides means to erase one or more blocks of the PDA Flash
memory.
User options are:
Start Physical Address default: 3A00000h Range: 3A00000h
3C00000h
3E00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3A00000h Range: 3A00000h
3C00000h
3E00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash erasing has been successful
3.5 – Lock Flash
This menu provides means to lock one or more blocks of the PDA Flash
memory. This function sets the particular lock bit in each Flash memory
block that is to be locked.
User options are:
Start Physical Address default: 3C00000h Range: 3A00000h
3C00000h
3E00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3E00000h Range: 3A00000h
3C00000h
3E00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash locking has been successful
To Next Page
Loading...