Lock your device remotely
1 To enable remote locking, select Menu > Ctrl. panel > Settings and
General > Security > Phone and SIM card > Remote phone locking >
Enabled.
2 Enter the text message content. It can be 5-20 characters, and both upper and
lower case letters can be used.
3 Enter the same text again to verify it.
4 Enter the lock code.
5 To lock the device remotely, write the predefined text, and send it to your device
as a text message. To unlock your device, you need the lock code.
Memory card security
Select Menu > Office > File mgr..
You can protect a memory card with a password to prevent unauthorized access.
To set a password, select Options > Memory card password > Set. The password
can be up to 8 characters long and is case-sensitive. The password is stored in your
device. You do not need to enter it again while you use the memory card on the
same device. If you use the memory card on another device, you are asked for the
password. Not all memory cards support password protection.
To remove the memory card password, select Options > Memory card
password > Remove. When you remove the password, the data on the memory
card is not protected against unauthorized use.
To open a locked memory card, select Options > Unlock memory card. Enter the
password.
If you cannot recall the password to unlock a locked memory card, you may reformat
the card, in which case the card is unlocked and password removed. Formatting a
memory card destroys all data stored on the card.
170 Security and data management