Starting a video call may take a while. Waiting for video image is shown. If
the call is not successful (for example, video calls are not supported by the
network, or the receiving device is not compatible), you are asked if you want
to try a normal call or send a text or multimedia message instead.
The video call is active when you see two video images, and hear the sound
through the loudspeaker. The call recipient may deny video sending (
), in
which case you only hear the sound and may see a still image or a grey
background graphic.
3 To end the video call, press the end key.
During a video call
View live video or listen to the caller only
Select Options > Enable or Disable and the desired option.
Mute or unmute the microphone
Select Mute or Unmute.
Activate the loudspeaker
Select Options > Activate loudspeaker. If you have attached a compatible headset
with Bluetooth connectivity, to route the sound to the headset, select Options >
Activate handsfree.
Switch back to the handset
Select Options > Activate handset.
Take a snapshot of the video you are sending
Select Options > Send snapshot. Video sending is paused and the snapshot is
shown to the recipient. The snapshot is not saved.
Zoom your image
Select Options > Zoom.
48 Make calls
To Next Page
Loading...
