scroll to an existing access point, and select Options > Organize > Copy to other
dest..
To change the priority order of access points within a group, scroll to an access
point, and select Options > Organize > Change priority.
Packet data access points
Select Menu > Ctrl. panel > Settings and Connection > Destinations > Access
point, and follow the instructions on the screen.
To edit a GPRS access point, open one of the access point groups, and select an access
point marked with
.
Follow the instructions from your service provider.
Select from the following:
Connection name — Define a name for the connection.
Data bearer — You might not be able to edit the data bearer once defined. Define
a new access point if needed.
Access point name — You obtain the access point name from your service provider.
User name — The user name may be needed to make a data connection, and is
usually provided by your service provider.
Prompt password — If you must enter the password every time you log in to a
server, or if you do not want to save your password in the device, select Yes.
Password — A password may be needed to make a data connection and is usually
provided by your service provider.
Authentication — Select Secure to always send your password encrypted or
Normal to send your password encrypted when possible.
Homepage — Depending on the access point you are setting up, enter the web
address or the address of the multimedia message center.
196 Settings
To Next Page
Loading...
