Before pairing, create your own passcode (1 to 16 digits) and agree with the owner
of the other device to use the same code. Devices that do not have a user interface
have a factory-set passcode. The passcode is used only once.
1To pair with a device, select Options > New paired device. Devices that are
within range are displayed.
2 Select the device, and enter the passcode. The same passcode must be entered
on the other device as well.
3 Some audio enhancements connect automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select Options > Connect to audio
device.
Paired devices are indicated by
in the device search.
To set a device as authorized or unauthorized, scroll to the device, and select from
the following options:
Set as authorized — Connections between your device and the authorized device
can be made without your knowledge. No separate acceptance or authorization is
needed. Use this status for your own devices, such as your compatible headset, PC
or devices that belong to someone you trust.
indicates authorized devices in the
paired devices view.
Set as unauthorized — Connection requests from this device must be accepted
separately every time.
To cancel a pairing, scroll to the device, and select Options > Delete.
If you want to cancel all pairings, select Options > Delete all.
Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a tone sounds, and you are
asked if you want to accept the message. If you accept,
is displayed, and the
Connectivity 93
To Next Page
Loading...
