User Guide Setting up the FastMile 5G Gateway 2
3TG-02464-AAAA-TCZZA-01 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
17
Setting up the FastMile 5G Gateway 2
Start by unpacking the FastMile 5G Gateway 2 and the power adapter from the box.
Inserting the SIM card
You can skip this procedure if a SIM card has already been installed in the FastMile
5G Gateway 2 by your service provider.
Turn the FastMile 5G Gateway 2 upside down.
Use the finger grove to remove the SIM tray from the SIM card slot.
Figure 6 Location of the SIM card slot
Place the SIM card in the SIM tray, and insert the SIM tray back into the device.
Note: The FastMile 5G Gateway 2 requires an appropriate 4FF/nano-size SIM card to
connect to 4G/5G network. The device might also not start as expected without a SIM card.
For PIN-locked SIM cards, you will need to enter a PIN number. For PIN-blocked SIM cards,
you will need to enter a PUK and a PIN number. See Unlocking or unblocking your SIM card.
To Next Page
Loading...
