Nokia FastMile 2 - Accessing the WebUI; Connecting and Logging into the WebUI

User Guide Accessing the WebUI
3TG-02464-AAAA-TCZZA-01 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
27
Accessing the WebUI
You can manage the FastMile 5G Gateway 2 using its WebUI through a PC or laptop
that has a Gigabit Ethernet LAN connection or Wi-Fi connection to the FastMile 5G
Gateway 2.
The following procedure describes:
• how to establish a connection from the device on which you will access the
WebUI for the FastMile 5G Gateway 2
• how to log into the WebUI when needed to view and configure parameters
Connecting to the WebUI and logging in
1. Ensure the Local Area Connection setting on your PC or laptop is configured as
“obtain an IP address automatically”.
2. Do one of the following:
a. Establish a Wi-Fi connection
b. Connect your PC or laptop through the LAN port on the back of FastMile 5G
Gateway 2
3. On your device, open a web browser, and enter the IP that is provided on the
label on the underneath of the gateway, for example:
http://192.168.1.1
(default) or https: //192.168.1.1 (if pre-configured)
The WebUI screen appears. The left side of the screen provides the main menu
for the WebUI and the right side of the screen provides overview information for
the FastMile 5G Gateway 2.
Note: The WebUI screens are designed for 1920 * 1080p resolution. The WebUI supported
browsers include Chrome, Edge, Mozilla Firefox and Safari.
Note: The FastMile 5G Gateway 2 must be powered up, see Starting the FastMile 5G
Gateway 2.