Nokia FastMile 2 - Application Screen

User Guide WebUI screens
3TG-02464-AAAA-TCZZA-01 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
57
Click the switch button to enable or disable the IPv6 DHCP LAN.
Connected devices
From the network menu, select Connected Devices.
The Network/Connected Devices screen appears.
Figure 40 Network/Connected Devices screen
Application screen
From the WebUI left-side menu, selecting Application allows you to configure
parameters for the following:
• port forwarding
• port triggering
•NTP
Port forwarding
Click Port Forwarding.
The Application/Port Forwarding screen appears.
Note: To delete a device, disconnect the Gigabit Ethernet cable from the FastMile 5G
Gateway 2. After a while, the Devices screen will update the number of connected devices.