EasyManua.ls Logo

Nokia FastMile 2 - Static Routes Parameters

Nokia FastMile 2
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WebUI screens
54
User Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3TG-02464-AAAA-TCZZA-01
•IPv4
IPv4 netmask
•IPv6
•MTU
Click Update.
Static routes parameters
From the network menu, select Static Routes.
The Network/Static Routes screen appears.
Figure 37 Network/Static Routes screen
You can add a static route by clicking Add+ after configuring the applicable
parameters:
destination IPv4
Note: You are not able to delete the default access point.
Valid first APN configurations are as follows:
1. TR-069 and INTERNET
2. TR-069: INTERNET and other service types defined in the secondary APNs
3. INTERNET: only one APN defined with INTERNET service type (Internet only
configuration is not allowed using the WebUI but is possible by pre-configuration).

Table of Contents

Related product manuals