Nomadic P1000 - Page 92

92
Menu Description
Security Settings
Setting a Password
1. Enter the Security Settings > Power On Lock menu, and select On.
2. Use the four arrow keys (Up / Down / Left / Right ) to enter a
six digits password by following the on-screen instruction.
3. Conrm the new password by re-entering the new password. Once
the password is set, the OSD Menu will return to the Security Settings
page.
4. Press OSD Menu or Return to leave the OSD Menu.
NOTE: 
• Make note of your password, and keep it in a safe place.
• Once set, the correct password must be entered every time the
projector is started.
Changing the password:
1. Enter the Security Settings > Change Password menu, and press OK
.
2. Enter the old password.
 If the password is correct, the message ‘INPUT NEW PASSWORD’
will appear.
 If the password is incorrect, a password error message will
appear for 5 seconds followed by the message, ‘INPUT CURRENT
PASSWORD’. You can try again or press OSD Menu or Return
to cancel.
3. Enter a new password.
4. Conrm the new password by re-entering the new password.
5. To leave the OSD Menu, press OSD Menu or Return .
NOTE:  The digits being input will display as asterisks(*).