1
NORAM 65ET GRADER
2-30
General Information
2
Electronic Display
7. Regeneration / After-Treatment System Cleaning In-
Progress - Displays icon when a regeneration in-prog-
ress cycle is active. Regeneration is controlled auto-
matically by the engine, unless inhibited by operator
input.
8. Regeneration / After-Treatment System Cleaning
Force Option - Displays icon when a forced regenera-
tion cycle is active. This option is best used immedi-
ately following deactivation of the Regeneration
Inhibit Option.
9. Regeneration / After-Treatment System Cleaning
Inhibit Option - Displays icon when inhibit regenera-
tion is active.
NOTICE: DO NOT leave Regeneration Inhibit Option active at all times, only use as needed. Preventing
a regeneration / after-treatment system cleaning cycle for long periods of time can cause damage to the
after-treatment system.
High exhaust temperatures during a regeneration cycle.
To Next Page
Loading...