6
1. Remove the four screws and the four shipping
brackets attached to the Frame (1) (only one
screw and one shipping bracket is shown).
Discard the screws and the shipping brackets.
Then, tighten four Leveling Feet (52) (only one
is shown) into the underside of the Frame (1).
1
52
1
Shipping Bracket
Screw
ASSEMBLY
• Assembly requires two persons.
•
Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
p
acking materials until you complete all
assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tool(s):
one Phillips screwdriver
o
ne adjustable wrench
one rubber mallet
Assembly may be easier if you have a socket set
or a set of ratchet wrenches. To avoid damaging
parts, do not use power tools.
To Next Page
Loading...
Need help?
General
