Safety
1-5
E 1999 Nordson Corporation
All rights reserved
Issued 10/98
S1EN–03–[SF–LECAP]–7
Do not use halogenated hydrocarbon solvents in a pressurized system
that contains aluminum components. Under pressure, these solvents
can react with aluminum and explode, causing injury, death, or property
damage. Halogenated hydrocarbon solvents contain one or more of the
following elements:
Element
Symbol Prefix
Fluorine F “Fluoro-”
Chlorine Cl “Chloro-”
Bromine Br “Bromo-”
Iodine I “Iodo-”
Check your material MSDS or contact your material supplier for more
information. If you must use halogenated hydrocarbon solvents, contact
your Nordson representative for information about compatible Nordson
components.
If a system or any equipment in a system malfunctions, shut off the
system immediately and perform the following steps:
S Disconnect and lock out system electrical power. Close hydraulic and
pneumatic shutoff valves and relieve pressures.
S Identify the reason for the malfunction and correct it before restarting
the system.
Dispose of equipment and materials used in operation and servicing
according to local codes.
Halogenated Hydrocarbon
Solvent Hazards
7. Action in the Event of a
Malfunction
8. Disposal
To Next Page
Loading...
