8 Miscellaneous work
85
(2) Peel off the mount and attach the label to the desk section.
Position of the Noritsu label (small)
(3) Peel off the cellophane.
Do not peel off the characters on the label together.
2. Attach the Noritsu label (large).
(1) Peel off the mount and attach the label to the printer section.
Position of the Noritus label (large)
(2) Peel off the cellophane.
Do not peel off the characters on the label together.
IMPORTANT
• Let enough time pass then remove the cellophane from the Noritus label (large).
The seal is easy to remove immediately after the attachment.
20 mm
7 mm
Noritsu label (small)
G077907
Cellophane
G081359
35 mm
25.5 mm
Noritsu label (large)
G077909
Cellophane
G081359
Distributed by: minilablaser.com
To Next Page
