www.linearcorp.com 22 e3 eMerge Installation Instructions
Assign the Server to Client
After the controllers are located on the network, the client must be linked to the server as
follows:
1. Using a web browser on a local computer, enter the IP address of the client as con๎ gured in
IP Installer.
2. ๎ e browser presents the Linear page as shown.
3. To log on, enter the user name (default = admin) and password (default = admin).
4. After a successful log on, the browser presents the page as shown. Click Edit.
Click Edit
To Next Page
Loading...