www.linearcorp.com 24 e3 eMerge Installation Instructions
5. e client will appear in the list. Click the Use/Not Use button to link the client to the server.
e button will display Use when the client is successfully linked to the server.
6. Click the Door icon and verify that the client doors are listed. e client and server are now
linked together.
7.5 Programming the System
e system provides the ability to access and manage the system from a web browser on any local
or remote computer. e system can be programmed using a simple Wizard tool, which allows
the user to con gure the basic settings. Visit the Wizard at any time by clicking icon in the
lower left corner of the web page. Refer to the User Programming Guide (P/N 620-100240) for
speci c programming and con guration instructions.
To Next Page
Loading...