www.linearcorp.com 3 e3 eMerge Installation Instructions
1.3 Installation Overview Checklist
e following list presents the steps required for successfully installing a system.
❒ Mount the enclosure
❒ Connect the readers
❒ Wire the inputs and outputs
❒ Connect power to the system
❒ Obtain IP address and other TCP/IP information from network administrator
❒ Con gure the network settings for the system
❒ Connect the system to a local area network (LAN)
❒ (Optional) Add licenses for additional doors and readers
Note: The checklist
provides a logical
sequence for installing a
system.
To Next Page
Loading...