www.linearcorp.com 26 e3 eMerge Installation Instructions
9.0 Test, Maintenance and Service
9.1 Testing
Monthly testing of the system is recommended.
♦ Check that all used inputs and outputs are correctly functioning with the connected devices.
♦ Check that system and log backups are occurring at scheduled times.
♦ Check for proper operation of backup battery. As a precaution, backup system data before
performing a battery test.
9.2 Maintenance
e systems require very little maintenance. It is recommended to check the following every
6months:
♦ Cover or door is secure
♦ Enclosure is clean and dry
♦ All wires are securely connected to the terminals and proper strain relief is used.
9.3 Service
ese systems contain Class 2 circuits. Do NOT alter or tamper with any of the components in
these systems.
ere are no user serviceable parts on the controllers or on the power supervision and battery
charger module. Contact technical service for assistance if you are experiencing operational
di culties.
Batteries used for the power backup should be replaced every 2-3 years. If using two batteries,
always replace both batteries with new, identical batteries.
9.4 Parts List
Polycarbonate Shield .............................................................................620-100070
Polycarbonate Shield for Elevator .........................................................620-100073
Tamper Switch for Compact Enclosure ................................................620-100038
Tamper Switch for Metal Enclosure ......................................................2500-2347
e3 PoE module ......................................................................................620-100159
Linear 30W PoE injector ......................................................................POE-PLUS
Linear 12VDC/24W PIP ......................................................................0-291312RU
Linear 12VDC/60W PIP (recommended power supply) ......................0-299177RU
Replacement Power Supervision/Battery Charger Module ...................620-100002
For a replacement Controller, please contact Nortek Security & Control Sales for support at
1-800-421-1587
To Next Page
Loading...