Configuring Security using Device Manager 143
The Trap Receivers tab appears.
—End—
Figure 37
Chassis dialog box Trap Receivers tab
"Trap Receivers tab fields" (page 143) describes the Trap Receivers tab
fields.
Table 65
Trap Receivers tab fields
Field Description
Indx An index of the trap receiver entry. Trap receivers are
numbered from one to four. Each trap receiver has an
associated community string (see the following Community
field description in this table).
NetAddr The address (or DNS hostname) for the trap receiver.
Community Community string used for trap messages to this trap
receiver.
Adding a Trap Receiver
To edit the network traps table, use the following procedure:
Step Action
1
In the Trap Receivers tab, click Insert.
The Chassis, Insert Trap Receivers dialog box appears.
The following figure displays the Chassis, Insert Trap Receivers
dialog box.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.
To Next Page
