Nortel 2526T User Manual

Configuring SNMPv3 193
Item Description
Unknown User
Names
The total number of packets dropped by the SNMP
engine because they referenced an unknown user.
Unknown
Engine IDs
The total number of packets dropped by the SNMP
engine because they referenced an snmpEngineID that
is not known to the SNMP engine.
Wrong Digests The total number of packets dropped by the SNMP
engine because they did not contain the expected
digest value.
Decryption
Errors
The total number of packets dropped by the SNMP
engine because they could not be decrypted.
—End—
Configuring user access to SNMPv3
You can view a table of all current SNMPv3 user security information such
as authentication/privacy protocols in use, and create or delete SNMPv3
system user configurations.
Creating an SNMPv3 system user configuration
To create an SNMPv3 system user configuration, use the following
procedure:
Step Action
1
From the main menu, choose Configuration > SNMPv3 > User
Specification.
The User Specification page appears.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.

Nortel 2526T Specifications

General

Model	2526T
Ports	24
Uplink Ports	2
Layer	Layer 2
Power Supply	Internal
Manageable	Yes
Switching Capacity	8.8 Gbps
Forwarding Rate	6.5 Mpps
Jumbo Frame Support	Yes
Type	Managed
Features	VLAN, QoS
Form Factor	Rack Mount
MAC Address Table Size	8K entries
Operating Temperature	0 °C to 40 °C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	10 - 95% (non-condensing)