Nortel 2526T User Manual

84 Configuring Security using the CLI
The mac-security security-list command is executed in the Global
Configuration command mode.
Table 42 "mac-security security-list command parameters and values"
(page 84) describes the parameters and variables for the mac-security
security-list command.
Table 42
mac-security security-list command parameters and variables
Parameters and
variables
Description
<1-32>
Enter the number of the security list that you want to use.
<portlist>
Enter a list or range of port numbers.
no mac-security command
The no mac-security command disables MAC source address-based
security. The syntax for the no mac-security command is:
no mac-security
The no mac-security command is executed in the Global Configuration
command mode.
The no mac-security command has no parameters or values.
no mac-security mac-address-table command
The no mac-security mac-address-table command clears
entries from the MAC address security table. The syntax for the no
mac-security mac-address-table command is:
no mac-security mac-address-table {address <H.H.H.> |port
<portlist>|security-list <1-32>}
The no mac-security mac-address-table command is executed in
the Global Configuration command mode.
Table 43 "no mac-security mac-address-table command parameters and
variables" (page 84) describes the parameters and variables for the no
mac-security mac-address-table command.
Table 43
no mac-security mac-address-table command parameters and variables
Parameters and
variables
Description
address <H.H.H>
Enter the MAC address in the form of H.H.H.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.

Nortel 2526T Specifications

General

Model	2526T
Ports	24
Uplink Ports	2
Layer	Layer 2
Power Supply	Internal
Manageable	Yes
Switching Capacity	8.8 Gbps
Forwarding Rate	6.5 Mpps
Jumbo Frame Support	Yes
Type	Managed
Features	VLAN, QoS
Form Factor	Rack Mount
MAC Address Table Size	8K entries
Operating Temperature	0 °C to 40 °C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	10 - 95% (non-condensing)