Nortel 2526T User Manual

Configuring SNMPv3 201
Item and MIB
association
Range Description
Security Level(vacm
AccessSecurity
Level)
(1) noAuthNoPr
iv
(2) authNoPriv
(3) authPriv
Choose the minimum level
of security required to gain
the access rights allowed to
the group.
Read View(vacm
AccessReadView
Name)
1..32
Type a character string to
identify the MIB view of
the SNMP context to which
this entry authorizes read
access.
Write View(vacm
AccessWriteView
Name)
1..32
Type a character string to
identify the MIB view of
the SNMP context to which
this entry authorizes write
access.
Notify View(vacm
AccessNotifyView
Name)
1..32
Type a character string to
identify the MIB view to
which this entry authorizes
access to notifications.
Entry Storage(vacm
SecurityToGroup
StorageType)
(1) Volatile
(2) Non-
Volatile
Choose your storage
preference. Selecting
Volatile requests information
to be dropped (lost) when
you turn off the power.
Selecting Non-Volatile
requests information to be
saved in NVRAM when you
turn off the power.
2
In the Group Access Creation section, type the required information
in the text boxes or select from a list.
3
Click Submit.
The new entry is displayed in the Group Access Table (Figure 70
"Group Access Rights page" (page 200)).
—End—
Deleting an SNMPv3 group access rights configuration
To delete an SNMPv3 group access configuration, use the following
procedure:
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.

Nortel 2526T Specifications

General

Brand	Nortel
Model	2526T
Category	Switch
Language	English