PN 15842:K 7/23/2002 5
Configuring Number of Expander Modules ...................................37
Speaker Control Mode ...................................................................38
Setting Address and DIP Switches: ACM-16AT, ACM-32A ................40
DIP Switch Summary: ACM-16AT, ACM-32A ............................40
Addressing ACM-16AT and ACM-32A .........................................40
Configuring Number of Expander Modules ...................................41
Supervising Devices with ACM-16AT, ACM-32A ...............................41
Programming the Control Panel and Annunciators ................................42
Selecting LED Colors: ACM-24AT and AEM-24AT ....................42
Selecting LED Colors: ACM-48A & AEM-48A ............................42
Testing the Annunciators ........................................................................42
5 LED and Keypad-Switch Functions ......................................................43
ACM-24AT, ACM-48A, and Expanders ...............................................43
Acknowledge/Lamp Test Switch ....................................................43
On-line LED ....................................................................................43
System Trouble LED ......................................................................44
Control Switch ................................................................................44
Point-Active LED ...........................................................................44
Trouble LED ...................................................................................44
ACM-16AT, ACM-32A, and Expanders ................................................45
ACM-16AT .....................................................................................45
AEM-16AT .....................................................................................46
ACM-32A .......................................................................................47
AEM-32A ........................................................................................48
Appendix A: AFP-100 Systems .................................................................. 49
Capabilities ............................................................................................. 49
Connecting the EIA-485 Circuit ............................................................ 49
Providing Power to Annunciators .......................................................... 49
Configuring Annunciators for AFP-100 ................................................ 50
Appendix B: AFP-200 Systems .................................................................. 51
Capabilities ............................................................................................. 51
Connecting the EIA-485 Circuit ............................................................ 51
Providing Power to Annunciators .......................................................... 51
Configuring Annunciators for the AFP-200 ........................................... 52
Appendix C: AFP-300/AFP-400 ................................................................. 53
Capabilities ............................................................................................. 53
Connecting the EIA-485 Circuit ............................................................ 53
Providing Power to Annunciators .......................................................... 53
Configuring Annunciators for the AFP-300/AFP-400 ........................... 54
System and Point Annunciation ............................................................. 55
Appendix D: AFC-600 Systems .................................................................. 56
Capabilities ............................................................................................. 56
Connecting the EIA-485 Circuit ............................................................ 56
Providing Power to Annunciators .......................................................... 56
To Next Page
Loading...
