Notifier NFS2-3030 User Manual

NFS2-3030 Operations Manual — P/N 52546:N1 06/20//2014 71
Print Programming Menu Screen Printing Reports
5.2 Print Programming Menu Screen
This screen displays when the PROGRAMMING soft key is pressed on the PRINTER FUNCTIONS
screen. Refer to Figure 5.1 on page 69).
Figure 5.2 Print Programming Screen
Soft Keys
NETWORK PARAMETERS: Press to print node number, node label, Channel A and B threshold,
network style. The report looks like this:
SETTINGS: Press to print broadcast time, event ordering, and block acknowledge. The report
looks like this:
TIMERS: Press to print timer values for Auto Silence, Silence Inhibit, AC Fail Delay time and
whether it has been enabled, Proprietary Reminder, and Remote Reminder timers. The report looks
like this:
PRINT PROGRAMMING MENU
NETWORK PARAMETERS LCD DISPLAY
SETTINGS
TIMERS MORE
BACK
******NETWORK PARAMETERS********************************************************
NODE:N124 STYLE 7 NO
NODE LABEL: LAKEVILLE GENERAL HOSPITAL
CH A. THRESHOLD: HIGH CH B. THRESHOLD: HIGH
IP ACCESS:OFF
********************************************************************************
******PANEL SETTINGS************************************************************
LOCAL CONTROL: NO TROUBLE REMINDER: YES
PIEZO: ON POWER MANAGEMENT MODE: OFF
PROPRIETARY SUPERVISING STATION: NO
EVENT ORDERING: USA
DISPLAY ADDRESS: YES
DC C PA RTI CI PAT IO N: NO
REGIONAL SETTING DEFAULT
LCM LOCAL MODE: NO
RAPID ALL CALL: NO
SILENCEABLE WATERFLOW: NO
MN PRIORITY OVER FIRE: YES
DRILL CONFIGURATION: AUDIBLE AND VISIBLE
SILENCE CONFIGURATION: AUDIBLE
********************************************************************************

Notifier NFS2-3030 Specifications

General

Type	Intelligent Fire Alarm Control Panel
Power Supply (6 amps total system power)	6 amps total system power
SLC Loop Voltage	24V DC
NAC Voltage	24V DC
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing
Network Capability	Yes, via NOTI-FIRE-NET
Programming	Via VeriFire Tools
Power Supply	120V or 240V AC, 50/60 Hz
Battery Backup	Yes
Communication Ports	RS-232, USB
SLC Loops	1 or 2
NAC Outputs	4
Operating Voltage	24V DC nominal
Number of Signaling Line Circuits (SLC)	2
SLC Loop Current	0.5 A max per loop
Number of Notification Appliance Circuits (NAC)	4
Total NAC Current	6 amps
Number of Relays	4
Relay Contact Rating	2.0 A @ 30 VDC