Notifier NFS2-3030 User Manual

NFS2-3030 Operations Manual — P/N 52546:N1 06/20//2014 73
Active Points Report Screen Printing Reports
CUSTOM ACTION MESSAGES: Press to print all custom action messages (1-100). The report
looks like this:
EVENT LOGGING: Press to print non-fire and output activations if these events have been chosen
for logging during panel programming. The report looks like this:
5.4 Active Points Report Screen
This screen displays when the ACTIVE POINTS soft key is pressed on the PRINTER FUNC-
TIONS screen (refer to Figure 5.1 on page 69).
Figure 5.4 Print Active Points Screen
Soft Keys
This screen provides a menu for printing a list of active points for whatever type of list is chosen.
The soft key will display on the screen only if there is at least one event in the queue.
******CUSTOM ACTION MESSAGE*****************************************************
C U S T O M A C T I O N M E S S A G E : 0 0 1
GO TO ALARM SITE AND INVESTIGATE APPROACH THE ALARM LOCATION WITH CAUTION
BRING CELL PHONE AND REPORT WHEN ON SITE
C U S T O M A C T I O N M E S S A G E : 0 0 2
CALL MANAGER WITH REPORT
********************************************************************************
******EVENT LOGGING*************************************************************
NON-FIRE ACTIVATIONS:NO OUTPUT ACTIVATIONS: NO
LOG WIRELESS STATES:NO
********************************************************************************
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A TUE JAN 25, 2011
ACTIVE POINTS
ALARMS ONLY PREALARMS
TROUBLES ONLY DISABLED POINTS
SUPERVISORY ALARMS ACTIVE OUTPUTS
SECURITY/OTHER BACK
NOTE: For a printed list of history information, refer to the history screens in Section 4, “Viewing
and Printing History Information”.

Notifier NFS2-3030 Specifications

General

Type	Intelligent Fire Alarm Control Panel
Power Supply (6 amps total system power)	6 amps total system power
SLC Loop Voltage	24V DC
NAC Voltage	24V DC
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing
Network Capability	Yes, via NOTI-FIRE-NET
Programming	Via VeriFire Tools
Power Supply	120V or 240V AC, 50/60 Hz
Battery Backup	Yes
Communication Ports	RS-232, USB
SLC Loops	1 or 2
NAC Outputs	4
Operating Voltage	24V DC nominal
Number of Signaling Line Circuits (SLC)	2
SLC Loop Current	0.5 A max per loop
Number of Notification Appliance Circuits (NAC)	4
Total NAC Current	6 amps
Number of Relays	4
Relay Contact Rating	2.0 A @ 30 VDC