Need help?Do you have a question about the Notifier NFS2-3030 and is the answer not in the manual?
General| Type | Intelligent Fire Alarm Control Panel |
|---|---|
| Power Supply (6 amps total system power) | 6 amps total system power |
| SLC Loop Voltage | 24V DC |
| NAC Voltage | 24V DC |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Humidity Range | 10% to 93% non-condensing |
| Network Capability | Yes, via NOTI-FIRE-NET |
| Programming | Via VeriFire Tools |
| Power Supply | 120V or 240V AC, 50/60 Hz |
| Battery Backup | Yes |
| Communication Ports | RS-232, USB |
| SLC Loops | 1 or 2 |
| NAC Outputs | 4 |
| Operating Voltage | 24V DC nominal |
| Number of Signaling Line Circuits (SLC) | 2 |
| SLC Loop Current | 0.5 A max per loop |
| Number of Notification Appliance Circuits (NAC) | 4 |
| Total NAC Current | 6 amps |
| Number of Relays | 4 |
| Relay Contact Rating | 2.0 A @ 30 VDC |
To Next Page
