Novation ReMOTE SL - Page 41

41
Mixer Mode
In Mixer mode you will see the track names on the ReMOTE SL displays and you can use the ReMOTE SL controls
as follows:
Instrument Mode
In instrument mode you will see the parameters of the currently selected instrument on the ReMOTE SL displays. If the
currently selected track does not have an instrument loaded into it, or is not an instrument track, then you will see dashes
across the ReMOTE SL displays indicating that there is nothing to control. In Instrument mode you can use the ReMOTE SL
controls as follows:
Note that only encoders, pots and sliders are used for control over plug-in parameters in Logic Instrument mode,
not buttons.
Track Select