Touchpad X Type – sets the Action of the Touchpad to: No Spring (value remains at the last contact point),
Spring Left (value jumps to the extreme left value when contact with the pad is ended), Spring Centre (value
jumps to the centre value when contact with the pad is ended)
Touchpad Y Type – sets the Action of the Touchpad to: No Spring (value remains at the last contact point),
Spring Down (value jumps to the bottom value when contact with the pad is ended), Spring Centre (value
jumps to the centre value when contact with the pad is ended)
Touchpad X Assign – sets the parameter controlled by the Touchpad x-axis between:
OFF – no control
BEND – pitch-bend
MOD - modulation
AFTERTOUCH - aftertouch
BREATH - breath
FILTER FREQ – filter frequency
FILTER RES – filter resonance
LFO1 RATE – speed of LFO1
LFO2 RATE – speed of LFO2
LFO2>FIL
TF –
amount that LFO2 modulates the Filter Fr
equency
Touchpad Y Assign – sets the parameter controlled by the Touchpad y-axis between the identical
parameters above
To Next Page
Loading...
