Edit Menu Page 2 – Template Transpose
This page allows the keyboard to be transposed within the Template. Rotating the DATA encoder will select
a value of XXX between - 64 and + 63. This will be the amount in whole semitones that the keyboard is
transposed by, e.g. to transpose up 4 semitones, set to + 4.
Edit Menu Page 3 – Keyboard Channel Select
This page defines the MIDI channel that the keyboard will transmit MIDI data on. Rotating the DATA encoder
will select a value of XX between 1 and 16. NB The MIDI channel for the pitch/mod joystick is separate from
this and programmable from within the individual Template (its MIDI channel can also be overridden using Edit
Menu Page 4 – Override Channel).
Edit Menu Page 4 – Keyboard Channel Select
This page defines the MIDI ports that the keyboard will send MIDI data to. Rotating the DATA encoder will
select an option for XXX between OFF, USB, MIDI and USB+MIDI. NB The MIDI ports for the pitch/mod
joystick are separate from this and programmable from within the individual Template.
Edit Menu Page 5 – Override Channel
This page allows the user to quickly set all controls (knobs and buttons within the current template) to
send data on the same MIDI channel without having to individually edit each control. XX can be set as ‘OFF’
or at a value between 1 and 16 as required, using the DATA encoder. If MIDI channel 4 is selected then
all controls will output data on MIDI channel 4 despite how they have been individually assigned.
Keyb MIDI Chan:
XX
Template Trans:
XXX
Keyb MIDI Ports:
XXX
Override MIDI Ch:
XX
To Next Page
Loading...
