Edit Menu Page 6 – X/Y Touchpad X Control Define
This page selects the type of X/Y Touchpad X-axis (horizontal) action. Rotating the DATA encoder scrolls
between three modes for XXX: No Spring, Spring Left and Spring Center.
1. No Spring – As soon as a finger is released from the touchpad, the value of the touchpad will remain in
the last touched position. A subsequent touch to the pad will result in a shift (at a sensible rate) to the new
touch value.
2. Spring Left – As soon as a finger is released from the Touchpad, the value of the Touchpad will shift back
to the far left (to a value of zero if 0-127 has been defined for this axis, or to a value of -64 if -64-+63 is
assigned to it).
3. Spring Centre – As soon as a finger is released from the Touchpad, the value of the Touchpad will shift
to the centre point of that axis (to a value of 64 if 0-127 is defined for that axis, or to a value of 0 if -64-
+63 is assigned to it).
Edit Menu Page 7 – X/Y Touchpad Y Control Define
This page selects the type of X/Y Touchpad Y-axis (vertical) operation. Rotating the DATA encoder scrolls
between three modes for XXX: No Spring, Spring Down and Spring Center. See above for definitions (middle
option jumps down).
Edit Menu Page 8 – Hybrid Mode 1 Activation
This page activates Hybrid Mode 1, where the Xio keyboard and/or 2-D controls can be used to play the
onboard Synth whilst using the rest of the knobs and buttons to MIDI control. Use the data encoder to select
from the following options:
OFF – The Synth will be inactive
KBD – The keyboard will play the Synth (and the data encoder will select the sound being played)
Touchpad Y Type:
XXX
Synth By Control:
XXX
Touchpad X Type:
XXX
To Next Page
Loading...
