NSK NLZ E - Connecting the Motor Cord; Connecting the AC Adapter

14
Preparations for Use
3-3
Connecting the Motor Cord
Align the motor cord plug and the motor connector at the back of the
main unit (
1
). Insert it firmly and tighten it completely (
2
).
POWER
AC28V
OUT
IN
①
②
CAUTION
ŘGently screw in the nut of the motor cord plug when tightening it.
ŘDo not pull the motor cord using more than necessary force.
3-4
Connecting the AC Adapter
1
Check that main power switch is off. ( side)
2
Insert the AC adapter plug, with the arrow facing
up, into the AC power cord connector at the back
of the main unit firmly.
POWER
A
C
OUT
POWER
AC28V
OUT
IN