NSK NLZ E - Cleaning Control Unit and Motor Cord

Post-use Maintenance
42
5-4
Cleaning, Disinfecting (Control unit, motor cord)
1
Turn off the power switch of the main unit.
POWER
A
C
OUT
2
Wipe the exterior of the control unit and the motor
cord clean using a cloth moistened with disinfectant or
ethanol with a concentration of 60-90%.
When using disinfectant, follow the instructions given by the manufacturer of the disinfectant.
Use a state-sanctioned disinfectant with proven bactericidal, fungicidal, and virucidal properties.
The following disinfectants can be used in the United States and Canada.
Example) CaviCide
®
, CaviWipes
®
(manufactured by Metrex)
CaviCide
®
and CaviWipes
®
are registered trademarks of Metrex Research, LLC.