NSK NLZ E - Page 19

18
Preparations for Use
4
In the setup mode, the function item can be
selected using the Speed Key (+/-) (
1
), and
the value can be changed using the Torque Key
(+/-)* (
2
).
* The Setting Key (+/-) in case of NLZ
5
Once a value is changed, the new value will
blink. Press the Mode Key quickly to save the
new value. Once saved, this new value will stop
blinking.
4-
1
4-
2
5
6
Change the settings by pressing the Torque Key
(+/-). * The Setting Key (+/-) in case of NLZ
6