- 10 -
11. ENTER BUTTON
This button selects and enables the configuration changes made on the menu and sub-menu
screens.
12. - / SEARCH BUTTON
This button is used to access the Time Search menu. It is also used to select options from various
menus.
13. PLAY / STILL / UP BUTTON
This button is used to start or pause the playback. It is also used to navigate to the up in the menu.
14. STOP / DOWN BUTTON
This button is used to stop the playback. It is also used to navigate to the down in the menu.
15. MENU BUTTON
This button is used to access the main menu.
16. CANCEL BUTTON
This button cancels any selection changes in sub-menus. It is used to hide the On-Screen-Display
information such as time, date and channel icons. It is also used to removes any of the alert icons
on the screen (Alarm, Video Loss, & Power Loss).
17. + / LOG BUTTON
This button is used to select options from various menus. It is also used to access the Log screen.
18. STEP FORWARD / FAST FORWARD / RIGHT BUTTON
This button is used to play picture by picture in forward and fast forward during playback mode. It
is also used to navigate to the right in the menu.
19. POWER BUTTON
This button turns the DVR on / off.
20. IR RECEIVER
21. USB PORT
USB compliant allows use of USB flash drive to upgrade the DVR’s firmware, backup the video
clips, and connect the mouse.
To Next Page
