nVent RAYCHEM Elexant 4010i/4020i User Manual
RAYCHEM-AR-H60624-40X0iOpsManual-EN-1905 nVent.com
|
39
4.1.4 Resetting the Safety Limiter
remotely using nVent RAYCHEM Supervisor. Refer to the operating manual for nVent RAYCHEM
Supervisor for detailed instructions on how to remotely reset a safety limiter.
Figure 28 - Elexant 4020i-MOD-IS-LIM Front Panel
4.1.5 Setting the Temperature Set Point
4.1.5.1 Choosing a Set Point
4.1.5.2 Conguring the Set Point
Modifying the set point requires physical access to the Elexant 4020i device. The lock out set point may
Supervisor if its user interface is physically close to the 4020i device. The procedure to modify the limiter