nVent RAYCHEM Elexant 4010i/4020i User Manual
RAYCHEM-AR-H60624-40X0iOpsManual-EN-1905 nVent.com
|
7
CHAPTER-1
1. OVERVIEW
1.1 Introduction
This manual provides information pertaining to the installation, operation, testing, adjustment and maintenance of the
nVent RAYCHEM Elexant 4010i/4020i Heat Tracing Controllers.
1.1.1 Product Overview
This section contains an overview of the Elexant 4010i/4020i Heat Trace Controller. It introduces the
manual.
The two major variants of the Elexant 4000 series controllers are the 4010i and the 4020i. The 4010i
models are designed for single circuit operation, and installed individually in an enclosure with an
to external EMR or SSR as the application requires.
1.1.1.1 Description
The Elexant 4010i/4020i series electronic heat tracing controllers control, monitor,
and communicate alarms and data for one
areas.
1.1.1.2 Elexant 4010i/4020i Series Variants
P/N Type Description
10380-001 4010i-EMR-FW
10380-002 4010i-SSR-FW
10380-003 4010i-EMR-SW Elexant 4010i EMR Controller in Stainless Steel Enclosure with Window
10380-004 4010i-SSR-SW Elexant 4010i SSR Controller in Stainless Steel Enclosure with Window
10380-005 4010i-EMR-IS-FW -
glass Enclosure with Window
10380-006 4010i-SSR-IS-FW
10380-007 4010i-EMR-IS-SW
Steel Enclosure with Window
10380-008 4010i-SSR-IS-SW
Stainless Steel Enclosure with Window
10380-015 4010i-MOD
10380-016 4010i-MOD-IS
10380-009 -
10380-010
10380-011
10380-012
Table 1 - Elexant 4010i Variants
To Next Page
Loading...
Need help?
General
