NXP Semiconductors S32K312EVB-Q172 - 5 S32 K312 EVB-Q172 - Default Configuration; MCU Power Supply; On-Board Debug; CAN Interface

NXP Semiconductors
S32K312EVB-Q172 HWUM
S32K312EVB-Q172 | S32K312EVBQ172ND - Hardware User Manual
S32K312EVB-Q172
S32K312EVBQ172ND
HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A1 – 01/2022
Page 5 of 25
Figure 2. S32K312EVB-Q172 – Features
5 S32K312EVB-Q172 - Default Configuration
Table 1. S32K312EVB-x172 - Default Configuration
Interface
S32K312
EVB-
Q172
S32K312
EVBS172
ND
Reference / Signal
Default
Configuration
Description/Comment
S32K312
MCU
●
●
U9
V1.01
P32K344EHT1VPBST
MCU
Power Supply
●
●
VDD_HV_A_MCU
+5.0V
The VDDA_HV_A domain is connected to +5.0V–
Switching Power Supply
●
●
VDD_HV_B_MCU
+3.3V
The VDDA_HV_B domain is connected to +3.3V–
Switching Power Supply
●
●
VDD_REFH_MCU
[VDD_HV_A]
The VDD_REFH domain is connected to
VDD_HV_A_MCU
OnBoard
Debugg
●
-
PTA15
PTA15/LPUART6_RX is routed to OpenSDA for serial
interface
PTA16
PTA16/LPUART6_TX is routed to OpenSDA for serial
interface
CAN
Interface
●
●
TJA1043/CAN0
PTA6
PTA26 is routed to the CAN0_RX signal
PTA7
PTA27 is routed to the CAN0_TX
PTC23
PTC23 is routed to the CAN0_ERRN