NXP Semiconductors S32K312EVB-Q172 - 7.1 S32 K312 EVB-Q172 - Main Power Supply

NXP Semiconductors
S32K312EVB-Q172 HWUM
S32K312EVB-Q172 | S32K312EVBQ172ND - Hardware User Manual
S32K312EVB-Q172
S32K312EVBQ172ND
HWUM
All Information provided in this document is subject to legal disclaimers
© NXP B.V. 2020. All rights reserved
NXP Semiconductors
REV A1 – 01/2022
Page 9 of 25
7.1 S32K312EVB-Q172 - Main Power Supply
Figure 4. S32K312EVB-Q172 – Main power supply input
Table 2. Main power supply connector
Connector
Description
Ground
V+ (+12Volts).
2.1mm Barrel Connector – J14
This connector should be used to connect the supplied wall-plug mains adapter. Note – if a
replacement or alternative adapter is used, care must be taken to ensure the 2.1mm plug
uses the correct polarization as shown